Advertisement
Roof Hatch, Smoke Vent and Floor Door Safety Railings
Installation, Operation & Maintenance
Model(s): BSRA/BSRV/BSRT
Exit Options – Chain, figure 8
This option is intended for roof hatch and floor door applications.
1. Remove set screws from top elbow or collar fitting of railing system.
2. Install provided eye bolts in set screw holes, figure 9.
3. Assemble chain and spring clips and install on eye bolts.
Figure 8
Exit Option – No Exit, Two and Four-Sided Rails
This option is intended for smoke vents and equipment roof hatches when there is no required exit.
OPERATION
Assure that all fasteners are tightened to the suggested torque. The gate should fully open and
close with no interference. The roof hatch should operate without interfering with the safety
railing.
MAINTENANCE
o It is recommended that the springs in gate be lubricated once a year to preserve the spring,
and that all fasteners meet the recommended torque setting.
QUESTIONS?
For more information on installation, repair or replacement, please visit
www.BabcockDavis.com
or call 888.412.3726.
5
©2020 Babcock-Davis, Inc.
REV 8/2020
Advertisement
