Related Manuals for Cairox SOLANO INDUSTRY-W-150
Summary of Contents for Cairox SOLANO INDUSTRY-W-150
- Page 1 SOLANO INDUSTRY TECHNICAL DOCUMENTATION / TECHNISCHE DOCUMENTATIE GEBRUIKSAANWIJZING / NOTICE D’UTILISATION / DOKUMENTACJA TECHNICZNA / MŰSZAKI LEÍRÁS...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. GENERAL INFORMATION ..........................2 DIMENSIONS..............................3 3. TECHNICAL DATA ............................3 4. INSTALATION ..............................4 4.1. INSTALATION SOLANO INDUSTRY-E ....................4 4.2. HARIZONTAL INSTALATION ........................4 4.3. VERTICAL INSTALLATION........................5 5. CONTROL SYSTEMS ............................ .6 5.1. CONTROL ELEMENTS .......................... -
Page 3: Dimensions
2. DIMENSIONS SOLANO INDUSTRY: N-150; W-150; E-150 SOLANO INDUSTRY: N-200; W-200; E-200 3. TECHNICAL DATA W-150 N-150 E-150 W-200 N-200 E-200 Fan power supply [V/Hz] 230 / 50 0,34 0,36 Fan power consumption 0,42 0,44 [kW] 11,5 Fan current consumption [A] 16,6 4000 4300... -
Page 4: Instalation
4. INSTALATION SOLANO INDUSTRY air curtains are delivered with set of hangers which allow install them horizontally as well as vertically. Installation pins and screws required for fix unit to the wall/floor/post are not included. Max size of covered doorway: •... -
Page 5: Vertical Installation
4.3. VERTICAL INSTALLATION Vertical installation is executed via included in set installation plates , which should mount unit to the floor. Next air curtain should be putted on the first one and screwed with it via installation plate , those installation plates must be anchored to the wall/post (drawing). -
Page 6: Control Systems
5. CONTROL SYSTEMS S-SPLIT – splitter allow: • Supply and protect up to three 3-steps air curtain; • Room thermostat connection*; • Valve acturattor connection*; • Door switch connection* * optional equipment 5.1. CONTROL ELEMENTS S-C - 3-speed fan switch with room thermostat Temperature range:: +10 …... -
Page 7: Connecting Diagram
5.2. CONNECTING DIAGRAM N-150; W-150; N-200; W-200 E-150; E-200 To supply curtain with power connect it by To start up curtain connect 3 x 400 V / 50 Hz connection box closest to unit side. Protract cable current to junction box placed between fan's by glands and connect wires according to scheme nozzles. -
Page 8: Wiring Scheme Solano Industry E (S-C)
5.2.2 WIRING SCHEME SOLANO INDUSTRY E (S-C) Œ Power supply: 230 V / 50 Hz Ž Door contact S-DS-MEC (door closed – closed (OMY 3x1,5 mm contats; door opened – opened contacts) (OMY • Air curtain step switch with thermostat S-C 2x0,5 mm (OMY 5x0,5 mm •... -
Page 9: Guidelines For Connection With Power Supply
6. GUIDELINES FOR CONNECTION WITH POWER SUPPLY • Before connecting the power, supply check the correctness of connection of the fan motor and the controllers. These connections should be executed in accordance with their technical documentation. • Before connecting the power supply check whether the mains voltage is in accordance with the voltage on the device data shield. -
Page 10: Cleaning And Conservation
9. CLEANING AND CONSERVATION Periodically need to be checked exchanger condition. Exchanger filled with dirt causes in heat output and air flow drop. If cleaning of heat exchanger is needed use listed guidelines. • Disconnect power supply of unit. • Dismount inlet grill guard •...