Technical Data; Installation - Zanussi ZOB35712 User Manual

Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven lamp does not operate.
The display shows 12.00.
Steam and condensation settle on
the food and in the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Voltage
Frequency

Installation

Warning! Refer to the Safety chapters.
www.zanussi.com
Possible cause
The clock is not set.
The necessary settings are not
set.
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
There was a power cut.
You left the dish in the oven for
too long.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity.
230 V
50 Hz
Remedy
Set the clock.
Make sure that the settings are
correct.
Do a check of the fuse. If the fuse
is released more than one time,
contact a qualified electrician.
Replace the oven lamp.
Set the clock.
Do not keep the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking ends.
.........................................
.........................................
.........................................
17