Air Purifier Maintenance And Care - Kenmore SMART 2300e Series Use & Care Manual

AIR PURIFIER MAINTENANCE AND CARE

Always follow all safety precautions when performing maintenance to the air purifier.
WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the air purifier. Failure to do so
could result in electrical shock or personal injury from air purifier suddenly starting.
NOTE: The air purifier must be unplugged
before cleaning.
1. Cleaning the main body.
1) Use a soft cloth to wipe down main
body.
2) Use a soft cloth and mild detergent to
remove tough stains.
NOTE: Do not scratch the main body with
hard objects during maintenance. Please
operate according to the instructions and
do not damage the machine parts when
removing the filter covers.
2. Replacing the filter.
1) The filter life may vary depending on
the environment and fan speed. The
The outer surface of the filter should be
cleaned every 2–4 weeks to increase
efficiency and extend the life of the
composite filter.
When the filter life will expire, the last
frame of filter life indicator bars will flash
to remind user to replace the filters. It is
recommended to replace the composite
filter every 6 months.
CLEANING AND MAINTENANCE
CLEANING & REPLACING FILTERS
filter may need to be replaced if there
is increased noise when the air purifier
is on, decreased airflow, unusual
odors, or the filter is visibly clogged.
2) When the surface of the outer pre-
filter is dusty, cleaning it with soft
cloth can extend the filter life.
3) The filter is recommended to be
replaced when Filter Life indicator
flashes.
NOTE: The filter lifespan may be shorter or
longer based upon fan speed, run time and
environment.
Please dispose the used filters as
combustible rubbish.
1. Unplug the air purifier. Remove the
filter covers as outlined in ASSEMBLY
INSTRUCTIONS (page 9).
2. Remove the old filters from inside the air
purifier.
- 14 -