Kenmore SMART 2300e Series Use & Care Manual page 13

WI-FI Connection
NOTE: The Kenmore air purifier supports
2.4GHz Wi-Fi networks and is compatible
with Apple iOS11 and above & Android 6
and above.
SCAN HERE to download the Kenmore
Smart™ app to your device and create a
profile.
• When the air purifier is plugged in for
the first time, it enters the standby state.
The Wi-Fi starts pairing. The Wi-Fi
indicator on the air purifier flashes (1HZ).
• Open the APP, and configure the
network according to the APP operation
process. After the network configuration
is successful, select the device name
"Kenmore_4030", and then start APP
operation.
• When the air purifier is successfully
connected to the Wi-Fi network, the Wi-
Fi indicator on the unit will illuminate
steadily.
• If there is no Wi-Fi connection, after
flashing for 10 minutes, the Wi-Fi
indicator light on the unit will be off.
WI-FI Connection Reset: In the working/
standby state, press and hold the ON/OFF
button for more than 5 seconds. "Ding-
Ding-Ding" sound will be emitted, and the
air purifier re-starts the Wi-Fi pairing. The
Wi-Fi indicator on the air purifier flashes
(1HZ).
CONTROLS & DISPLAY
- 13 -
SCAN HERE
Or Visit
kenmorefloorcare.com/smart-2300e-
series/
for full product instructions.
How To Distinguish Between 2.4 GHz and
5 GHz Networks
Newer routers can have a dual-band router
with both 2.4 GHz and 5 GHz bands. Go
into your Wi-Fi settings to check and if
you see two or more Wi-Fi network names
that belong to you, you may have a dual-
band router. A 2.4 GHz network may
have "24G", "2.4" or "24" added to the
end of the network name. For example:
"Myhomeinternet2.4". Connect to the 2.4
GHz network before setting up your air
purifier.
Memory Function
• If the air purifier is turned off but still
plugged in, when it is turned on again, it
will remember its previous AUTO mode
or Manual mode settings.
• If the filter cover is opened during the
operation of the air purifier, the motor
will stop working. The indicator lights
on the control panel will be off with an
"E6" error code shown on the display
screen. If the filter cover is still open
after 5 minutes, the "E6" error code on
the display screen will turn off. After the
filter cover is closed, the display screen
and control panel return to the original
settings, and the motor starts to work
again.
• At any time when the air purifier is
unplugged or powered off, it will be
in the standby state when powered on
again.