Kenmore SMART 2300e Series Use & Care Manual page 4

the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.
• This air purifier is not to be used by
persons (including children) with reduced
physical, sensory, or mental capacities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of the
appliance by a person responsible for
their safety.
WARNING
To reduce the risk of fire or electric
shock, do not use this air purifier with
any solid-state speed control device.
Electromagnetic Fields (EMF)
Your air purifier complies with all standards
regarding electromagnetic fields (EMF).
If handled properly and according to the
instructions in this Use & Care Guide, the
appliance is safe to use based on scientific
evidence available today.
FCC COMPLIANCE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful
interference, and
• This device must accept any interference
received, including interference that may
cause undesired operation.
CAUTION
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
IMPORTANT SAFETY INSTRUCTIONS
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
To satisfy FCC / IC RF exposure
requirements, a separation distance of 20
cm or more should be maintained between
the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer
than this distance is not recommended.
- 4 -