Table of Contents
Advertisement
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 3.0 screw (1) that secures the drive cover.
2.
Remove the cover (2).
3.
Pull the drive out of the socket.
32
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
27).
25).
Battery on page
28).
Advertisement
Table of Contents
