About The Indications In The Display - Sony HT-DDW660 Operating Instructions Manual

Hide thumbs Also See for HT-DDW660:
Table of Contents

Advertisement

About the indications in the display

1
2
L F E SP
SW
L
C
R
SL S SR
qs
A SW: Lights up when audio signal is output
from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP: Lights up when you turn on the receiver.
Turns off when you connect headphones to the
PHONES jack.
D ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
E ; PRO LOGIC II: "; PRO LOGIC" lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music decoder is
activated.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding do not function for DTS format signals.
F DTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG" (page 20).
G Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 13–15 for tuner operations.
H D.RANGE: Lights up when dynamic range
compression is activated (page 21).
I COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
16
GB
3
4
;
;
DIGITAL
SLEEP OPT COAX
qa
0
9
5
6
PRO LOGIC II DTS
J OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
K SLEEP: Lights up when sleep timer is
activated.
L Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
D.RANGE
STEREO MONO
8
L
C
R
SL
SR
7
MEMORY

Advertisement

Table of Contents
loading

Table of Contents