About The Indications In The Display - Sony STR-K6800P Operating Instructions Manual

About the indications in the display

1 2 3
;
LFE SP A
SW
SP B SLEEP OPT COAX
L C R
SL S SR
SB
qd
A SW: Lights up when the audio signal is output
from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: "; DIGITAL" lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
"; DIGITAL EX" lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
E ; PRO LOGIC II: "; PRO LOGIC" lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music decoder is
activated.
F DTS-ES: "DTS" lights up when DTS signals
are input. "DTS-ES" lights up when DTS-ES
signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG" (page 31).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
4 5
;
DIGITAL EX PRO LOGIC II DTS-ES
qs qa q;
6 7
NEO:6
D.RANGE STEREO MONO
9
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 22–24 for tuner operations.
I D.RANGE: Lights up when dynamic range
compression is activated (page 32).
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
K OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
L SLEEP: Lights up when sleep timer is
activated.
M Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by 6.1
channel decoding))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
L
SL
MEMORY
8
C R
SR
25 US