Using The Setup Menu; Setting Sounds; Setting Power Save - HP CW450 User Manual

Using the Setup Menu

You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
Menu button
1. Press
Menu.
2. Use the or keys to switch the menu tab to Setup menu.
3. Use the or
4. To select an item, press the
5. Change the submenu settings using the 4-way navigation control.
6. Press the OK button

Setting Sounds

Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select
2. Adjusts sound settings.
OK button
3. Press the
Item Available Settings
Startup Sound 1, Sound 2, Sound 3, Off
Shutter On, Off
Beep
0-4
Volume

Setting Power Save

The Power Save function allows you to set an idle time after which
the camera automatically sets to sleep mode to save power. After
a minute of being in sleep mode, the camera eventually turns off
power.
This function is not available in the following instances:
• Recording a movie or audio file
• Playing a slideshow/video/audio file
• Using the USB connector
to launch the Record/Playback
keys to move through the menu selections.
OK button
to save and apply settings.
Sounds.
to apply changes.
Description
Selects the startup sound when camera is turned on.
Enables or disables shutter sound when Shutter button is pressed.
Shutter sound is not available when recording movies or voice
clips.
Adjusts volume.
or key.
62