HP CW450 User Manual page 44

Setting the AEB
AAEB stands for Automatic Exposure Bracketing. It takes 3 consecutive photos in the order of standard exposure,
under exposure and overexposure compensation.
To set AEB
1. From the Record menu, select
2. Use the or keys to go through the selection.
3. Press the OK button
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
1. From the Record menu, select AF Area.
2. Use the or keys to go through the selection.
OK button
3. Press the
The table below shows the available AF area settings.
Icon Item
Multi
Spot
Setting the AF Lamp
The AF Lamp function allows you to record images even low
light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front
of the camera, see "Front View" on page 7, emits an red
light by half pressing the Shutter button allowing the
camera to focus easily.
To set AF Lamp
1. From the Record menu, select AF Lamp.
2. Use the or keys to go through the selection.
3. Press the OK button
AEB.
to save and apply changes.
to save and apply changes.
Description
The camera automatically selects focus area within the wide frame.
The focus area is fixed on the center spot.
to save and apply changes.
40