Advertisement
2.2. Network parameters setup
Search and load the Buspro Wireless IP gateway
Network parameters are set by setting the HDL-MCIP-RF02.10 gateway. The gateway must
first be loaded to appear in the basic screen of the HBST2 program, see Fig.2.
The Fast search command starts the search of
devices. The result is a single find at the
moment, and that is the MCIP wireless gateway.
Fig.2 Wireless gateway HDL-MCIP-RF02.10 and its connection to the PC
Setting up the wireless network address system
After loading the gateway, select the address system of the Buspro Wireless network. The
address consists of two parts, Subnet ID and Device ID, see Fig. 2. Select the value of the
Subnet ID parameter, the factory setting is usually 200, values from 1 to 255 can be used.
Change the address by clicking on the gateway line in the Subnet ID column or Device ID.
Note: Unlike other devices, the Device ID address value of the wireless gateway cannot be
changed and is 0.
Setting the transmission parameters of the wireless network
Settings are made in the gateway's basic window, which is opened by clicking on the
gateway row in the Model or
Description column. Set the
parameters according to Fig. 3
and 4.
Band: frequency band.
Choose SRD to operate
the system in Europe.
Channel: Choose the frequency so
as not to interfere with any other
devices.
Note
Multiple wireless networks
operating in the same space can be
separated by different frequencies.
Password: Choose a password to
encrypt your network. Max. length 16
characters.
Fig.3 Setting the wireless network transmission parameters, tab Basic setup
Buspro Wireless: Pairing_of Buspro Wireless_devices
M_Pairing_of _Buspro_Wireless_devices_(2019-11)_EN
Na závěr nezapomeňte
nastavení uložit.
4 z 6
Advertisement
