To Conclude A Time Out Early; Time Of Day; To Set Time Of Day - Nevco MPCW-7 Operator Instructions Manual

Hide thumbs Also See for MPCW-7:
Table of Contents

Advertisement

To Conclude a Time out Early

There may be a desire to skip to the warning time and/or conclude the time out early. To do this while the time
is counting:
First, to use this function the MPCW-7 must be on the time out timer screen.
To reenter the time out screen press the TIME OUT TIMER key.
If on the time out timer screen press the TIME OUT TIMER key.
• The timer should skip to the warning time.
• The scoreboard's horn should sound for 2 seconds.
• The MPCW-7 should beep for 2 seconds.
Press the TIME OUT TIMER key again to conclude the time out.
• The MPCW-7 will go back to the main time screen
• The scoreboard's horn should sound for 4 seconds
• The MPCW-7 should beep for 4 seconds

TIME OF DAY

When Time Of Day is set the MPCW-7 will keep track of Time of Day:
• Time Of Day can function with the 12 and 24 hour clock
• A press of TIME OF DAY will display time of day on the scoreboard in the main time place
• Compatible scoreboards can display time of day while the scoreboard is turned off
Note: Refer to the OPTIONS section of this manual to stick time of day (displays the time while the control is turned off) and
change the Time of Day from 12 to 24 hours

To Set Time of Day

1. Press
then
2. Enter the Hours and Minutes.
a. After all four digits are filled it automatically accepts the time.
b. If less than 4 digits are entered and YES is pressed, then zeros will be placed in the unfilled digits
and the time will be accepted.
c. If less than 4 digits are entered and there is an error press NO/Cancel.
i. The previous value is set
ii. The control goes back to the main screen
; the control will then display.
10
12:00.0▼ Per:1
ToD: HH:MM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents