Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SOLINTEG Integ M
Summary of Contents for SOLINTEG Integ M
- Page 1 I nteg Hybrid I nverter Quick Use Guide E N GL I SH VE R SI O N...
- Page 2 ② Register an account on Monitoring APP. If you have got the account and password from the distribu- tor/installer or Solinteg, skip this step. 1.2 Inspection Before Commissioning Check the following items before starting the inverter: ①...
- Page 3 2 WiFi Module Configuration Guide Prepare a laptop or Searching for the Smartphone and turn corresponding WLAN on the WLAN in the WLAN connec- connection. tion list “WIFI-AP********” (*represents the last 8 numbers of the inverter SN), and tap connect. Open the browser and Tap“Scan”，A list of enter 10.10.100.254.
- Page 4 If connected successfully “Connec- tion succeeded” will displayed. After successful configure, the indicator status of WIFI module will be steady on. 3 LAN Module Configuration Guide If DHCP is enabled on the router, the LAN module does not need to be configured. Otherwise, the LAN module will need to be configured on inverter screen.
- Page 5 4 Local configuration App Local configuration App is designed for quick configuration of hybrid inverters, offering features such as safety code, battery brand and type, work modes, and off-grid application settings through WiFi direct connection, etc. There are two connection modes, WiFi direct connection and router connection. Router Smart phone...
- Page 6 The inverter communication is running normally. The inverter communicates with EMS or Master inverter Green Flashing through RS485 or CAN. Communication Orange Always on The inverter isn’t communicating with Solinteg smart meter. Indicator Always on The inverter isn’t communicating with the BMS.
- Page 7 5.2 Monitoring Device Indicator Status Description Connection abnormal Communicate with the server normally Always On The monitoring device is not connected to the router or is not connected to the base Slow flashing station. The monitoring device is connected to the router or connected to the base station but Quick flashing not connected to the server.
- Page 8 www.solinteg.com...
Need help?
Do you have a question about the Integ M and is the answer not in the manual?
Questions and answers