Table of Contents
Advertisement
Insert 2 odour filters into the appliance on the left
4.
and right, and slide them forwards.
Insert the other odour filters into the appliance on
5.
the left and right.
Insert the grease filter.
6.
Resetting the saturation indicator
Requirement: After the appliance is switched off,
lights up.
Replace the odour filter.
1.
Press and hold
until an audible signal sounds.
2.
a The
display stops lighting up. The saturation indic-
ator for the odour filters is reset.
16.6 Cleaning the grease filters
Grease filters filter the grease from the cooking vapour.
To keep them in good working order, you must clean
the grease filters regularly.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Never operate the appliance without a grease filter.
▶
Clean the grease filters regularly.
▶
Never work with naked flames close to the appli-
▶
ance (e.g. flambéing).
Do not install the appliance near a solid fuel heating
▶
appliance (e.g. wood- or coal-burning) unless the
heating appliance has a sealed, non-removable
cover. There must be no flying sparks.
1.
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
▶
Remove the grease filter.
Grease may accumulate in the bottom of the
‒
container. Hold the grease filter level to prevent
grease from dripping out.
‒
Clean the grease filter.
2.
→ "Cleaning the grease filters manually",
‒
Page 15
→ "Cleaning the grease filter in the dishwasher",
‒
Page 16
If required, remove the odour filters and clean the
3.
inside of the appliance.
→ "Replacing the odour filters", Page 14
If any objects get into the appliance, remove these
4.
objects and ensure that the supply to the overflow
container is not blocked.
Wipe out the inside of the appliance with soapy wa-
5.
ter and a dish cloth.
After cleaning, reinsert the dried grease filter.
6.
Cleaning the grease filters manually
Dismantle the grease filter.
1.
Soak the grease filter in hot soapy water.
2.
Use a brush to clean the grease filter.
3.
Do not use aggressive, acidic or alkaline cleaning
products.
Use special grease solvent for stubborn dirt. You
can purchase the grease solvent from the after-
sales service, through our online shop or in a spe-
cialist shop.
Rinse the grease filters thoroughly.
4.
Allow the grease filters to drain.
5.
Cleaning and servicing en
15
Advertisement
Table of Contents
