en Hood control
8 Hood control
You can use the hood control to control the highly effi-
cient air extraction system that is integrated in the
cooking surface.
8.1 Manual ventilation control
You can control the ventilation setting manually.
Note: Using tall items of cookware may prevent the ex-
traction system from working at optimum power. You
can improve the extraction power by placing the lid on
the cookware at an angle.
Activating the manual ventilation control
Touch
.
1.
The ventilation system starts at the preset perform-
ance level.
Use the and symbols to select the required
2.
performance level within the next 10 seconds.
a The performance level lights up.
Note: If you have set a cooking time or timer duration,
touch
to view the ventilation setting.
Changing or deactivating manual ventilation
control
Touch
.
1.
Select the required performance level or set the
2.
and symbols to .
8.2 Intensive ventilation setting
The appliance has an intensive ventilation setting. If you
activate the intensive ventilation setting, the ventilation
system works at maximum output for a short time.
Activating the intensive ventilation setting
Touch
.
1.
Select performance level and then touch .
2.
The
display lights up.
a The intensive setting is activated.
Note: After approx. eight minutes, the appliance auto-
matically switches back to performance level .
9 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
9.1 Switch-off timer
Allows you to programme a cooking time for a hotplate
and its automatic switch-off once the set time has
elapsed.
Programming the cooking time
Select the cooking zone and the required power
1.
level.
2.
Touch
.
a The display lights up in the cooking zone.
10
Changing or deactivating the intensive
ventilation setting
Touch
.
1.
Select the required performance level or set the
2.
and symbols to .
8.3 Automatic start for the ventilation
system
If you select a power level for a cooking zone, the auto-
matic start switches on.
The ventilation system starts at the corresponding
power level. You can find out how to change this set-
ting in section
→ "Basic settings", Page 12.
8.4 Run-on function for the ventilation
system
The run-on function leaves the ventilation system run-
ning for a few minutes after the hob has been switched
off. This allows you to remove any cooking fumes that
remain. The ventilation system then automatically
switches off.
Activating the fan run-on
As standard, the run-on time is activated with a max-
imum switch-off time.
You can find out how to change this setting in section
→ "Basic settings", Page 12.
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least
one minute.
Deactivating the fan run-on
Manually
To deactivate the function, touch .
Automatically
The appliance deactivates the run-on function if:
¡ The run-on time has elapsed.
¡ You switch the appliance on again.
Use
or to select the cooking time.
3.
a The time begins to count down.
Note: You can automatically set the same cooking time
for all cooking zones. You can find more information
about this under
→ "Basic settings", Page 12.
Changing or deleting the cooking time
Select the cooking zone.
1.
Touch .
2.
To change the cooking time, touch or
3.
to .
or set it