Panasonic RF-D10 Operating Instructions Manual page 7

█
Remove unavailable listed stations
This unit indicates those stations that are closed or
no longer available with a question mark in front of
the station name. You can remove these stations
from the station list.
1
Press [MENU] and then turn
[ TUNE/SELECT ] to select "Prune".
2
Press [ENTER].
3
Turn [ TUNE/SELECT ] to select "Yes" and
then press [ENTER].
To cancel, select "No".
Listening to a station
1
Turn [ TUNE/SELECT ] to select a station
from the station list.
2
Press [ENTER] to tune to the selected station.
Note:
" " indicates a secondary service station. Secondary
service stations are always listed next to their primary
station in the station list.
Presetting stations
You can preset up to 10 stations into the direct
preset buttons.
1
While listening to a station, press and hold the
desired direct preset button ([1] to [10]).
Example: press and hold [2] to store current
station into preset 2.
2
Press [ENTER] to preset the station.
█
Listening to a preset station
Press the direct preset button ([1] to [10]) to listen
to the preset station.
Manual tuning
You can perform manual tuning to a particular
channel or frequency. This can be useful when you
are adjusting the antenna to achieve the best
possible reception and scanning a particular
channel to update the station list.
1
Press [MENU].
2
Turn [ TUNE/SELECT ] to select "Manual
tune" and then press [ENTER].
3
Turn [ TUNE/SELECT ] to select a
frequency or channel and then press [ENTER].
The display shows the received signal strength
of the selected frequency. Adjust the antenna to
achieve the best reception.
threshold indicator
Adjust the antenna so that the received signal
strength (solid rectangles) exceeds the
threshold indicator.
Viewing available information
You can view various information about the DAB
broadcast such as dynamic label information (if
available), signal strength, program type, ensemble
name, channel number, bit rate, DAB variant and
date.
Press [DISPLAY] to view available information.
Press and hold [DISPLAY] to show the default
display.
FM radio
1
Press [BAND] to select "FM".
2
Press [AUTOTUNE] to tune to a station.
The unit stops tuning when it finds a station.
Press [AUTOTUNE] again to tune to the next
station.
Manual tuning
Turn [ TUNE/SELECT ] to tune to the required
station.
7