System Settings - Panasonic RF-D10 Operating Instructions Manual

Presetting stations
You can preset up to 10 stations into the direct
preset buttons.
The first five stations are preset with a default
frequency for your convenience.
1
While listening to a station, press and hold the
desired direct preset button ([1] to [10]).
2
Press [ENTER] to preset the station.
█
Listening to a preset station
Press the direct preset button ([1] to [10]) to listen
to the preset station.
Viewing available information
You can view the information of the radio station
such as Radio Data System text, frequency and
date.
Press [DISPLAY].
Note:
Radio Data System may not be available if reception is
poor.

System settings

█
To view the System menu
When in DAB mode
1
Press [MENU].
2
Turn [ TUNE/SELECT ] to select "System"
and then press [ENTER].
When in FM mode
Press [MENU].
█
To navigate around the menu
Turn [ TUNE/SELECT ] to select an item or
option. Press [ENTER] to confirm.
Example: Backlight setting displays
Indicates current setting
8
Alarm The Alarm Wizard is shown.
• Alarm: On, Off
Select "On" to switch on the
alarm.
• On time: Set the hours and
minutes of start time.
• Source: Buzzer, DAB, FM
Set the audio source.
If FM or DAB is set, select the last
station you tuned in to ("Last
listened") or a preset station as the
audio source.
• Set the volume
The alarm starts at a low volume
and increases gradually to the
preset level.
" " is shown after you set the alarm.
Note:
• The alarm does not work when the unit
is powered by batteries.
• Check that the date and time are set
correctly, or else the alarm may not
work as desired.
• The alarm will come on at the set time
every day for a duration of 90 minutes.
Press any button or turn any knob to
stop the alarm.
• You need to set the alarm again every
time you disconnect and connect the
AC power, or after you replace the
batteries.
Sleep The sleep timer switches off the unit
after the set time (in minutes).
Sleep Off, 30 minutes, 60 minutes,
90 minutes, 120 minutes
" " is shown.
Equaliser Flat, Heavy, Soft, Clear, Vocal
" " is shown.
Time The time and date information are
updated automatically with the
DAB/Radio Data System broadcast
(if available).
You can also set the time and date
manually with the Time menu.
This is a 24 hour clock.
• Set time: Set the hours and
minutes.
• Set date: Set the day, month and
year.
Backlight • 10 sec: The backlight switches off
after 10 seconds of inactivity.
• On: The backlight is always on.
Language You can change the language for the
display panel.
English, Italiano, Deutsch, Français
Factory Yes, No
Reset
Select "Yes" to reset the unit to
factory default setting.