Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell D32M Service Manual
Tower desktop
Hide thumbs
Also See for D32M:
- Owner's manual (124 pages) ,
- Service manual (110 pages) ,
- Setup and specifications (24 pages)
Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Left-side cover
Solid-state drive
Wireless card
Hard drive
Power-supply unit
Optical drive
Media-card reader
Front I/O-bracket
10
Removing and installing components
Screw type
6-32
M2x3.5
M2x3.5
6-32, pan head
#6-32, hex head
M2x2
6-32, pan head
6-32, pan head
Quantity
2
1
1
4
3
2
1
2
Screw image
2
Advertisement
Table of Contents
