Installing The Optical Drive - Dell D32M Service Manual

Steps
1. Place the computer on its side with the left-side facing up.
2. Disconnect the power and data cables from the optical drive.
3. Remove the two screws (M2x2) that secure the optical drive to the optical-drive cage.
4. Pull to slide out the optical drive through the front of the computer.

Installing the optical drive

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the optical drive and provides a visual representation of the installation
procedure.
Removing and installing components 19