lap 213PP Manual

Led brick light

Download this manual

Commissioning

Gently push the product into the wall, taking care not to trap any wiring.

Replace fuse or circuit breaker and switch on. Your light is now ready for use.

Fitting / Replacing Bulbs

This system contains replaceable parts that can be replaced by the end user.

Care and Cleaning

We recommend cleaning with a soft cloth.

Do not use solvents or abrasive cleaners as these could damage the finish.

Recycling Advice

Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer

for recycling advice.

Safety Information

For your safety, always switch off the supply before cleaning.

The shade must be replaced immediately should the shade become

place.

Obtain new LED module and replace with the failed unit by following the installation

steps overleaf.

This product contains a light source of energy efficiency class F.

UK Manufacturer:

EU Manufacturer:

Kingfisher International Products Limited,

Kingfisher International Products B.V.

3 Sheldon Square, London, W2 6PX,

Rapenburgerstraat 175E,

United Kingdom.

1011 VM Amsterdam, The Netherlands.

LED Brick Light

213PP

03/11/21

Need help?

Do you have a question about the 213PP and is the answer not in the manual?

Page 1 Gently push the product into the wall, taking care not to trap any wiring. Replace fuse or circuit breaker and switch on. Your light is now ready for use. 213PP Fitting / Replacing Bulbs This system contains replaceable parts that can be replaced by the end user.
Page 2 Thank you for purchasing this light Cut the mounting hole for the unit taking care not to damage any pipes or mains cables Please read the instructions carefully before use to ensure safe and satisfactory operation of beneath the mounting surface. this product.