Table of Contents
Advertisement
Safety Instructions
SAFETY, CONTROL, AND INSTRUCTION DECALS
if any are missing, illegible, or damaged, a replacement should be ordered and installed before
putting the machine into operation. The Decal Part Number is listed below and in the Parts Manual.
Location: RH Fender
Part Number: 8600-68
18
Safety, Control, and Instruction Decals are installed on the machine;
1.
2.
3.
4.
5.
6.
1.
Warning – read Operator's Manual before
servicing or performing maintenance.
●
Engage parking brake.
●
Remove ignition key.
2.
Forward Speed Control
●
Move lever forward to increase speed; back
to stop.
3.
Warning – roll-over hazard.
●
Do not mow or drive the tractor within 5 feet
of an embankment with a drop off.
●
Do not operate on slopes greater than 15
degrees.
●
Do not mow within 5 feet of a body of water.
4.
Throttle
●
Move lever forward to increase engine
speed; back to idle.
5.
Warning – do not operate the machine without
a deck or other implement attached.
6.
Seat Panel Latch
●
Move lever backward to release.
●
Lift seat panel to raise.
Location: Underside of Seat Panel
Part Number: 6107
1.
Ground drive belt routing.
2.
Engine belt routing.
C23i
1.
2.
Advertisement
Table of Contents
