Advertisement
Visage Lighting & Effects
secure installation to ensure the device does not swing freely
the use of safety rope at least 12 times the weight of the fixture
A maximum drop distance never exceeding 20cm
FIRE SAFETY
Connection cables are as follows:
Cable
Pin
Brown
Live
Blue
Neutral
Yellow/Green
Earth
INSTRUCTIONS FOR USE
DMX – 512 connection. Wires must not come into contact with each other. Only use a twin
screened shielded cable and 3-pin XLR plug and connector in order to connect the controller with
the fixture, or one fixture with another XLR connector.
DMX-input
XLR mounting - socket XLR
When using controllers with this device you can connect the DMX output of the controller directly
with the DMX input of the first fixture in the DMX chain.
Building a serial DMX chain. Connect the DMX output of the first fixture in the DMX chain with the
DMX input of the next fixture. Always connect one output with the input of the next fixture until all
fixtures are connected.
DMX MODE
6 Channel Mode
Channel
CH1
CH2
CH3
www.visage-lighting.co.uk
International
L
N
1. Ground
2. Signal(-)
3. Signal(+)
Function
Red Dimmer- 0-100%
R Dimmer
Green Dimmer- 0-100%
G Dimmer
B Dimmer
Blue Dimmer- 0-100%
DMX-output
XLR mounting - socket:
Instruction
1. Ground
2. Signal(-)
3. Signal(+)
Advertisement
