Advertisement
Quick Links
VIS245 STAGE DESK 48
Ⅰ. PRODUCT DESCRIPTIONS
Thank you for using our 48CH DMX dimmer console. To optimize the
performance of this product, please read these operating instructions carefully
to familiarize yourselves with the basic operations of this unit. The main
features of this product include:
● 48DMX control channels
● 96 chaser programs
● 2 Independent dipless cross faders
● 3 Digit LCD display
● Digital technology adopted
● Power failure memory
● Standard MIDI and DMX ports
● Powerful program edit
● Various program edit
● More programs can run synchronously
Read the instruction in this manual carefully and thoroughly, as they give
important information regarding safety during use and maintenance. Please
keep this manual with the unit in order to consult with in the future.
Ⅱ. WARNINGS
1. To prevent or reduce the risk of electrical shock or fire, do not expose this
unit to rain or moisture.
2. Clearing memory often may case damage to the memory chip, be careful
not to initialize your unit frequency too often to avoid this risk.
3.
Only use the recommended AC/DC power adaptor.
4.
Be sure to save the packing carton in case you may ever have to return the
unit for service.
5.
Do not attempt to operate this unit if the power cord has been frayed or
broken.
6.
Do not attempt to remove or break off the earth prong from the electrical
cord. This prong is used to reduce the risk of electrical shock fire in case of
an internal sort.
7.
Disconnect from main power before making any type of connection.
8.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
9.
Disconnect the unit's main power when left unused for long periods of
time.
10. This unit is not intended for home use.
11. Carefully inspect this unit for damage that may have incurred during
shipping. If the unit appears to be damaged, do not attempt any operation,
please contact your dealer.
12. This unit should be operated by adults only, never allow small children
tamper or play with this unit.
13. Never operate this unit under the following conditions.
- In places subject to excessive humidity
- In areas with a temperature over 45
0
0
2
C/-35.6
F
Ⅲ. CAUTIONS
1. There are no user serviceable parts inside this unit.
2.
Do not attempt any repairs yourself, doing so will void your
manufactures warranty
0
0
C/113
F For less than
1 of 9 pages
Advertisement
Related Manuals for ViSAGE VIS245 STAGE DESK 48
Summary of Contents for ViSAGE VIS245 STAGE DESK 48
- Page 1 Only use the recommended AC/DC power adaptor. Be sure to save the packing carton in case you may ever have to return the VIS245 STAGE DESK 48 unit for service. Do not attempt to operate this unit if the power cord has been frayed or broken.
- Page 2 In the unlikely event your unit may require service contact your nearest Light when relevant scenes are active dealer 6. Channel Sliders 25-48- These 24 sliders are used to control and/or program the intensities of channels 25-48 7. Flash Buttons 25-48 These 24 buttons are used to bring an individual channel, to full intensity.
- Page 3 direction of all programs. Repeatedly tapping this button establish the chase speed. 17. Add or Kill/Rec Exit- 29. Full On Button- In All mode, multiple scenes or Flash buttons will be on at a time. In Kill This function bring overall output to full intensity. mode.
- Page 4 40. Audio Input- down the Record button, release the two buttons at a time, the Record mode This jack accepts a line level audio input signal ranged from 100Mv to 1V is engaged. IMPORTANT!!! Always remember to exit Record mode when you won’t continue your 41.
- Page 5 button while holding down the Record LED should go out. 2) Tap the Flash buttons 1. 4. 2 and 3 in sequence while holding the Record EXAMPLE: program a 16 steps chase with cannel 1-32 at full in sequence button. All LEDs will flash. Indicating all programs stored in memory into Flash button 25 of page 1.
- Page 6 You may read the step from the Segment Display. run is located. 4) Tap the Insert button to insert the step you’ve created before all LEDs 3) Push Master Slider B to its maximum position (fully down). will flash. Indicating the step is inserted. 4) Move the desired Channel slider (25-48) to its maximum position to 5) Exit Edit mode.
- Page 7 CONTROLLER RECEIVER 4) Move the Speed slider until Segment Display reads your desired value. MIDI file dump. MIDI OUT MIDI IN MIDI OUT MIDI IN You may tap the Tap Sync button twice to define your beat time. 5.5 Sending MIDI File Dump 5) While pressing and holding down the Rec Speed button, tap the Flash Tap the Flash button 3 three time button (25-48) that stores the program.
- Page 8 2. Fade Time Close Loop Mode 1) The amount of time it will take for dimmer go from zero output to maximum output, and vice verse. 2) Fade time is adjusted through the Fade Time Slider. Which varies from instant to 10 minutes. 5) The controller will send and receive Note On Off data via the Flash 3.
- Page 9 4) Press the MODE SELECT BUTTON and select “CHNS◄►SCENES” Weight----------------------------------------------------------------------6.3Kgs 5) Press the PARK BUTTON to select SINGLE CHASE MODE A red LED will indicate this selection 6. Mix Mode 1) Will run all programs synchronously 2) All programs can be controlled by the same SLIDER SPEED. Or each programs speed may be controlled individually.
Need help?
Do you have a question about the VIS245 STAGE DESK 48 and is the answer not in the manual?
Questions and answers