Table of Contents
Advertisement
Quick Links
VIS220 Visage 6 Channel Dimmer Pack with LCD Display
The Visage 6 Channel Dimmer Pack can work stand-alone, used as a DMX pack, or controlled by
analog signal. In stand-alone mode, there are 12 built-in programs available, all with adjustable
speed. When working as a DMX pack, it can be controlled through 1 to 6 channels, by address
between 001 to 512. In analog mode, it can be controlled by 6 channel signal in DC 0-10V
Functions include pre-heating, circuit brake protection, phase compensation and master/slave.
POWER SUPPLY----------------------------- SINGLE PHASE AC 220V 50-60HZ
LOAD-------------------------------------------------------------------MAX： ： ： ： 6 x 10A/CH
DMX OUTPUT------------------------------------------------3PIN female XLR socket
DMX INPUT-----------------------------------------------------3PIN male XLR socket
ANALOGUE INPUTS----------------------------------------DC 0-10V 8PIN D socket
DIMENSIONS------------------------------------------------------482 x 40 x 90mm
THE POWER SUPPLY ON-LINE DIAGRAM： ： ： ：
SINGLE PHASE AC220V 50-60HZ： ： ： ：
E
E
E
3-PHASE AC220V 50-60HZ： ： ： ：
E
E
E
Operating instructions： ： ： ：
1,START MENU
：
Connect to switch on power supply, first the LCD shows the edition number and start the automatic check in
alternate current, and then, The this time DMX instructions the light flash is slow. After completes. Enter to start
L
L3
L2
L1
L3
L2
L1
L3
L2
L1
3-PHASEAC 220V 50-60HZ
N
N
N
N
N
N
N
N
1 of 7 pages
Advertisement
Table of Contents
Related Manuals for ViSAGE VIS220
Summary of Contents for ViSAGE VIS220
- Page 1 VIS220 Visage 6 Channel Dimmer Pack with LCD Display The Visage 6 Channel Dimmer Pack can work stand-alone, used as a DMX pack, or controlled by analog signal. In stand-alone mode, there are 12 built-in programs available, all with adjustable speed.
- Page 2 menu. (Meet the plank show the diagram) In start menu, the first each channel of manifestation front value, the first each channel of manifestation inside the front changes the value of the channel; The second each channel of manifestation preface number, the first each channel of manifestation inside front changes the preface number of the channel.
- Page 3 they inside of the biggest value outputs. 2.3 FUNCTION MENU ： 3.1 FIRST CLASS FUNCTION MENU： While starting the menu, press MENU under“start”menu, then enter first-class function menu, the LCD displays as following AUTO Press once UP/DOWN to circularly choose one of following six first-class functions in the menu：AUTO、Dmx addr、preheating、Curve、preset。...
- Page 4 A. Under the first-class function in PHA CORR menu, press MENU to enter the second-class function menu, it shows the current mutual compensation status; it runs as following if the current status is YES. Pha corr 。 Press UP/DOWN to choose: Yes/No [No] : without mutual compensation [Yes]...
- Page 5 second line will shows the relevant channel address accordingly. Channel sequence number circulates from Chan [1] to Chan[12]. Press MENU, the movable light mark turns to the channel sequence number address line, press UP/DOWN, the address adds/reduce 1, the other channel address is constant, hold it more than two seconds, address quickly adds/reduce 1.
- Page 6 preheating value on the second line, press the key and hold it more than two seconds, the channel sequence number will adds/reduce 1 quickly, preheating value one the second line varies accordingly, the channel sequence number circulates from Chan[1] to Chan[12]. Press the key of MENU, the movable light mark transfer to the line of channel sequence number, then press the UP/DOWN once to add/reduce preheating value by 1%, the preheating value of other channel remains constant, press the key and...
- Page 7 PROG02：100000、010000、001000、000100、000010、000001 PROG03：100001、010010、001100、010010 PROG04：011111、101111、110111、111011、111101、111110 PROG05：011110、101101、110011、101101 PROG06：000001、000011、000111、001111、011111、1111111、000000 PROG07：111111、011111、001111、000111、000011、000001、 000000 PROG08：100000、110000、111000、111100、111110、111111、 000000 PROG09：100001、110011、111111、110011、100001、000000 PROG10：100000、110000、111000、111100、111110、111111 111110、111100、111000、110000、100000、000000 PROG11：110000、001100、000011 PROG12：001100、010010、100001、000000 3．CONNECT THE LINE DIAGRAM： SINGLE PHASE AC220V 50-60HZ： CH.6 CH.5 CH.4 CH.3 CH.2 CH.1 LOAD MAX：10A/CH 3-PHASE AC220V 50-60HZ： CH.6 CH.5 CH.4 CH.3 CH.2 CH.1 L L N LOAD MAX：10A/CH 7 of 7 pages...
Need help?
Do you have a question about the VIS220 and is the answer not in the manual?
Questions and answers