Page 1
LED SPIDER LIGHT Stock code: VIS070 INSTRUCTION MANUAL Specifications LED’s: 8 x 6 watt RGBW Power: 55watts Power Inlet: 240v 50Hz Mains Inlet/Outlet sockets: IECC 3pin DMX connection: 3pin XLR Male and 3 pin XLR Female DMX Channels: 7 Channel or 15 channel...
Page 2
Digital Display and Menu MODE UP DOWN ENTER Switch on the unit and the two moving parts will reset themselves to the start point. Using the menu below select the MENU pattern you require: READING FUNCTION Addr This sets the DMX address A001-A512 Chnd Selects DMX mode from 7 channel or 15 channel SLnd...
DMX OPERATION: The unit has two modes of DMX operation either 7 channels or 15 channels. Using the menu buttons select the units to the desired channel Chnd. You then need to set the DMX channel of each channel, firstly select Addr on the menu and press ENTER, then using the up and down buttons select the DMX channel required, once selected press ENTER to confirm.
Page 4
DMX 7 Channel Operation continued- DMX Channel Function DMX Value Function 5 continued Motor control 237-246 Effect 24 Multi-effect self-propelled, the motor runs automatically 247-255 Effect 25 Sound Control Effect Speed 0-255 From slow to fast Reset 241-250 Hold for 5 seconds to reset the unit.
Need help?
Do you have a question about the VIS070 and is the answer not in the manual?
Questions and answers