Download Print this page

ViSAGE VIS086 Operation Manual

6way tri 5w led pinspot bank

Advertisement

Quick Links

5W Tri-colour LED Pin Spot System is the mix light with six pieces lights, which is controlled by 4 button, it is MODE,
SETUP, UP, DOWN to operation. This item has 6pcs LED in tri-colour? It has program saving function. It means that the
fixture will keep the same program as the last time when you re-open the light.
Specification
LEDS: 6pcs 5W(3 in one)
Beam angle: 11°
Selectable built-in programs, Auto running, dimming mode, DMX mode, slave mode, sound-activated.
Black Aluminum
Size: 800
×
9 0
×
2 30MM
Weight: 4 kgs
Power input: AC90V-240V/50HZ-60HZ
Power consumption: 30W
3PIN female XLR socket and 3PIN male XLR socket
IR remote available
Operation mode
·
m anual dimmer color mode
·
m anual select the built-in program mode
·
a uto run mode
·
s ound mode
·
s lave mode
·
D MX mode
Here above six kinds running mode are selected by MODE button. Press MODE and SET UP button at the same time,
when it is on, you can initialize it at extra factory setting, running on the auto-run program mode. To make the display
stay on all of the time press the MODE and UP buttons at the same time. To make the display turn off after 20 seconds,
press the MODE and DOWN buttons at the same time.
1. Manual dimmer color mode
Press "MODE" button, press "SETUP" to choose the display 3 color and flash speed, red
"
× × × "
blue
b .
, press the "SETUP" to choose different color, press "UP" or "DOWN" button to set the dimming rate
(0-255).When "FS.XX" is display, press "UP" or "DOWN" to select flash speed 0-99, "0"is turn off flash.
2. Manual select the built-in program mode
Press "MODE" button to select the built-in program mode, the LED display shows "Pr.XX". Under this mode, press
"SETUP" button to select the program, the color jumping speed and flash speed. When "Pr.XX" is displayed, press "UP"
or "DOWN" button to set the program 1-12,total 12 programs. when "SP.XX" is displayed, press "UP" or "DOWN" to
set the jumping speed(1-99), when "FS.XX" is displayed, press "UP" or "DOWN" to set the flash speed(0-99), "0"is turn
off flash.
Notice: " Pr.01" is static color program. There are 8 colors to choose from. Press the SET UP button to enter the static
Batmink Distribution, Beckery Road, Glastonbury, Somerset, Tel: 01458.833186 www.batmink.co.uk
VIS086 6WAY Tri 5W LED Pinspot Bank
Operation Manual
1 of 5 pages
"
r .
× × × "
,green
"
G .
× × × "
,

Advertisement

loading
Need help?

Need help?

Do you have a question about the VIS086 and is the answer not in the manual?

Questions and answers

Summary of Contents for ViSAGE VIS086

  • Page 1 VIS086 6WAY Tri 5W LED Pinspot Bank Operation Manual 5W Tri-colour LED Pin Spot System is the mix light with six pieces lights, which is controlled by 4 button, it is MODE, SETUP, UP, DOWN to operation. This item has 6pcs LED in tri-colour? It has program saving function. It means that the fixture will keep the same program as the last time when you re-open the light.
  • Page 2 color submenu, the LED display shows “CL.-X” Use the UP or DOWN buttons to scroll through the static colors. 3. Auto run mode Press “MODE” button, ”AUTO.” is displayed, the built-in programs run one after another in continuous loop. Under this mode, press “SETUP”...
  • Page 3 2)DMX mode2 Dimmer Strobe Program Select Speed Sensitivity Color Select 236-255 Auto-run 0-7=OFF 216-235 program12 0=stop 8-255=ON 0-10=OFF 196-215 program11 1-255=ON (insensitive→ 221-255 RGB 0-255 11-255=ON 176-195 program10 (slow→ sensitive) 186-220 GB (dim→ (slow→ 156-175 program9 quick) 151-185 RB bright) quick) 136-155 program8 116-150 RG...
  • Page 4: Dmx Mode

    Operation by IR remote: You can also operate this product by IR remote, the distance available is at most 10M. Notice: IR remote is ready to control the product which is in any working mode. The picture of the IR remote AUTO RUN mode Press “AUTO RUN”...
  • Page 5: Black Out Mode

    Set ADDR Press this button to set the DMX address or initialize the program, then the red, green lights will flash 2~3 times. Please put in 3 number, for example, 1 2 3. After the red light is on, please put in the first number. After the first number is accessed the green light will be on, then put in the second number.