Assembly Instruction - HOP-SPORT ULTIMA HS-4000LB Instruction Manual

GB Assembly

Assembly instruction

Warning! Do not turn the power on until you assemble the treadmill. To assemble the device, use tools included in the set.
Open the box, take out the parts, put the treadmill body on flat
1
surface. Softly lift the console in direction indicated by arrow
in the picture.
Using screws (70) and washers (87), attach console to
2
the vertical columns.
Lift columns and put them in position indicated in the picture.
3
Using screws (69, 70, 76), washers (87) and nuts (90),
screw columns to the treadmill base on its outer sides (as
in the picture).
Warining! To avoid injury or device damage, support console
and columns during assembly, until you make sure that they are
firmly installed to the treadmill corpus.
59