Dac Filter - Neumann.Berlin MT 48 Instruction Manual

DAC filter

The DA converters offer four output filter modes:
Go to MENU → SETTINGS → AUDIO OUTPUTS → ROLL OFF FILTER:
X
Sharp (default setting): Offers a flat frequency response with an attenuation of 3 dB at 0 .484 x
FS (23 .2 kHz @48k), which has the tradeoff of 35 samples latency .
Slow: Offers the lowest latency of 9 samples, with the tradeoff of a gentle frequency response
attenuation reaching -3dB at 0 .45 x FS (21 .6 kHz @48k) .
Apodizing: Fast roll-off, linear phase filter . Avoids pre-ringing for super accurate transient
response . Latency of 35 samples .
MT 48 | 36