Routing Example: Using External Outboard As Hardware Plug-Ins In Your Daw - Neumann.Berlin MT 48 Instruction Manual

Routing example: Using external outboard as hardware
plug-ins in your DAW
Let's say you have an ADAT AD/DA converter that you want to use to integrate analog outboard
into your workflow as" hardware plug-ins" in your DAW . (You could do the same with analog
inputs/outputs 3+4 or Peered inputs/outputs) .
1 . Connect the outputs and inputs of your ADAT converter to the inputs and outputs of your
outboard gear .
2 . Go to SETTINGS → USB I/O → INPUTS ROUTED TO COMPUTER and activate OPTICAL . Your
ADAT Inputs can now be addressed via the channel numbers displayed .
3 . Go to SETTINGS → USB I/O → SOFTWARE PLAYBACK – Direct Routing and activate OPTICAL .
The ADAT Outs can now be addressed directly in your DAW via the channel numbers dis-
played .
MT 48 | 13