Reverb; Snapshots - Neumann.Berlin MT 48 Instruction Manual

Reverb

Every channel has a send to the built-in reverb . Please note that there is only one reverb pro-
cessor for all four mixers . So, the send level in the individual channels is the same in all four
mixers . However, the Reverb has its own output fader . Using the REV fader, the total amount of
reverb can be adjusted in each mixer individually .
Please note that reverb is for monitoring purposes only, i .e . to give singers and musicians
a more inspiring sound in their headphones . Reverb is not recorded, not even in the PostFX
driver channels .
The Reverb parameters can be edited . Press on the REV channel name and select Edit REV:
The controls are similar to what you would find in a plug-in or hardware unit:
LOW CUT
ROOM SIZE
HIGH CUT
PREDELAY
DECAY
DIFFUSION

Snapshots

EQ, Dynamics, and Reverb each have their own snapshots (presets), which, of course, is par-
ticularly useful for the Reverb:
10 Hz ... 20 kHz
small ... large
10 Hz ... 20 kHz
0 ... 300 ms
0 ... 100%
0 ... 100%
MT 48 | 23