Setting Up Inputs And Outputs In Your Daw - Neumann.Berlin MT 48 Instruction Manual

Setting up inputs and outputs in your DAW

In most DAWs inputs and outputs must be activated before you can use them . This is usually
done in Preferences or I/O Setup or Audio Connections – please refer to your DAW manual .
Usually, it is best to setup inputs as stereo pairs as you can use stereo inputs to record mono
tracks (by specifying the left or right channel), but you cannot use mono inputs to record ste-
reo tracks .
Create stereo inputs for all hardware inputs you previously activated in MT 48 USB I/O SETUP .
Channel naming is not transmitted to your computer . To avoid confusion, it's a good idea to
name the channels in your DAW accordingly . This is what it looks like in Steinberg Cubase/
Nuendo 12; other DAWs work similarly:
Do the same for the Output channels:
Now the correct names will be displayed whenever you select an input or output in your DAW .
MT 48 | 17