Connect Vcr And Dvd Recorder; Connect Decoder And Vcr - Philips 26PFL7532D - annexe 2 User Manual

33.2 Connect VCR or DVD recorder
With a eurocable
1
Connect the aerial cables 1 and 2
as shown.
Connect the eurocable 3 as shown.
2
Press the key on the remote
3
control display Source list.
Press the ï key repeatedly to select
4
EXT2 and press the Æ /
confirm selection.
Connectors at
rear of TV (facing
Cable
downward)
1
2
Recorder
With the aerial cable only
1
Connect the aerial cables 1 and 2
as shown.
Tune in your recorder's test signal and
2
store the test signal under programme
number 0.
(See "Manual tuning of analogue
programmes", page 29. See also the
user manual of your recorder)
46
key to
Connectors at
rear of TV (facing
backward)
3
.
Cable
1
2
Recorder

33.3 Connect Decoder and VCR

Connect a eurocable 4 to your decoder
and to the special euroconnector of your
recorder. See also the user manual of your
recorder.
Warning
Do not place your recorder too close to
the screen as some recorders may be
susceptible for signals from the display.
Keep a minimum distance of 0,5 m from the
screen.
Tip
You can also connect your decoder directly
to EXT1 or EXT2 with a eurocable.
Recorder
Connectors at
rear of TV (facing
downward)
4
Decoder