Philips 26PFL7532D - annexe 2 User Manual page 55

Symptom
No digital channels
One or a few tiny spots on
the screen that do not
change colour along with
the video picture
Intermittent or flickering • Noise is displayed if the connected digital equipment such
picture in HD mode
No sound or picture but
front panel red light is on
PC modes do not
work
S-Video colour
becomes faint
Black bar on top and
bottom of screen in
PC mode
AC3 not available
TV antenna cannot be
powered by set
Changing from one
channel to another
channel takes a long time
Cannot access digital
menu
52
Possible solutions
• Contact your dealer about the Digital Video
Broadcasting Terrestrial signal availability in your country.
• This symptom is not a problem. The liquid crystal
panel is built with very high precision technology
giving you the fine picture details. Occasionally, a
few non-active pixels may appear on the screen
as a fixed point of red, blue, green or black.
Note : this does not affect the performance
of the set.
as DVD player or Set-Top box failed. Check user
manual of the digital equipment you are connecting.
• Use a standard-compliant (high-quality) HDMI to DVI
cable.
• Press the key on the remote control.
• Check whether connections are correct. (see page 49).
• Check whether the source is correctly selected.
Press button to enter Source list and select the
correct source.
• Check whether you have configured the computer to
a compatible display resolution (see page 49).
• Check graphic card setting of PC.
• Check whether SVHS cable is properly connected.
• Press the P + key on the remote control to do a
channel up and then press the P – key to do a
channel down.
• Change PC refresh rate to 60 Hz.
• AC3 is not supported for this set. Use the
on the remote control to select an alternative audio.
• Some TV antennas need to be powered by the set.
This set does not support such a feature.
• Pay TV channels are encoded by the cable provider and
take a longer time to decode. This is normal behaviour
and no action is required.
• Check whether TV is in analogue mode. If it is, press
key to switch to digital mode.
key