Connecting Peripheral Equipment; Connecting A Dvd Recorder Or Vcr Recorder - Philips Flat tv User Manual

Connecting Peripheral Equipment

The diagram below shows the sockets on the TV.
key on the remote control to
Press the
AV/SVHS, PC, HD or FM Radio according to the equipment you have connected.
the TV to the selected mode.
TV
FM
75Ω
ANT
:

Connecting a DVD Recorder or VCR Recorder

TV
75Ω
:
3
1
RECORDER
Connect the aerial cable 1. Use a good quality euroconnector cable 2 to obtain the optimum picture
quality. If your recorder does not have a euroconnector socket, the only connection possible is via
the aerial cable 3. You will therefore need to tune in your video recorder's test signal and assign it
programme number 0 or store the test signal under a programme between 90 and 99 (see Manual
Store on page 6). See also the handbook of your recorder.
key to
Press the
switch to the selected source.
Decoder with Recorder
Connect a eurocable 4 to your decoder to the second euroconnector socket of your recorder. See
also the handbook of your recoder. You can also connect your decoder directly to EXT1 with a
eurocable.
IMPORTANT : In order to connect your Canal + decoder, please use EXT 1 scart only.
16
display Source List.
EXT1
FM EXT1
ANT
2
4
use the Î ï keys
display Source List and
Use the Î ï keys
Use the Æ
DVI-I
(HD/PC)
DVI-I
(HD/PC)
DECODER
to select EXT1. Use
to select EXT1,
switch
key to
R
AUDIO
IN
L
VIDEO
IN
S-VIDEO
DVI
AUDIO
IN
Source
TV
EXT1
Æ
AV / SVHS
PC
HD
FM Radio
AV key
the Æ
key to