Connect Peripheral Equipment; Recorder (Vcr-Dvd+Rw); Other Equipment; (Satellite Receiver, Decoder, Dvd, Games, Etc.) - Philips 32PF9976/12 User Manual

Philips matchline widescreen flat tv 32/42" lcd hd ready with pixel plus
Hide thumbs Also See for 32PF9976/12:
Table of Contents

Advertisement

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
can handle CVBS and RGB;
EXT1
480p, 576p, 1080i and 1152i.
It is preferable to connect peripherals with RGB output to
Note: If your recorder is provided with the EasyLink function, it should be connected to
EasyLink functionality.
Recorder (
-
VCR
DVD
Note: Do not place your recorder too close to the screen as some recorders may be susceptible to signals from the
display. Keep a minimum distance of 0,5 m from the screen.
CABLE
EXT2
1
2
3
RECORDER

Other equipment

CABLE
CABLE
4
1
2
RECORDER
CVBS, Y/C and RGB;
EXT2
+
)
RW
4
DECODER

(satellite receiver, decoder, DVD, games, etc.)

&
EXTERNAL
é
5
3
"
CVBS;
EXT3
or
as RGB provides a better picture quality.
EXT1
EXT2
Connect the aerial cables 1, 2 and, to obtain the
optimum picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the
only possible connection is via the aerial cable.You will
therefore need to tune in your recorder's test signal and
assign it programme number 0 or store the test signal
under a programme number between 90 and 99, see
Manual installation, p. 6.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the
special euroconnector of your recorder. See also the
recorder handbook. See Decoder, p. 10. You can also
connect your decoder directly to
eurocable.
Connect the aerial cables 1, 2 and 3 as shown
(only if your peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to
one of the euroconnectors
better picture quality.
Look for the test signal of your peripheral in the same
way as you do for a recorder.
Make a selection in the Setup, Source menu, p. 10.
can handle VGA, SVGA and
DVI
to benefit from the
EXT2
or
with a
EXT1
2
,
or
to obtain a
EXT1
2
3
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents