Wiring Instructions - Qlightec QTEX Manual

Explosion proof product label
• All equipment that are used in explosive environment must have a label showing on following details in accordance with
International Electrotechnical Commission(IEC) Regulation 60079-0.
ATEX, IECEx explosion proof certification
TIIS explosion proof certification
General label

Wiring Instructions

• QTEX/ QTEXB model can be wired with either external contact and transistor.
•
When wiring with transistor, please make sure to use PNP transistor and follow the wiring instructions in the diagram below.
Red
Amber
Green
Blue
White
Red2
Black
Gray
Common
Orange
Violet
KCs explosion proof certification
External contacts
Layer1
Layer2
Layer3
Layer4
Layer5
Buzzer
Steady
Flash
Common
Fuse
Power (Current)
It must not be dismantled due
to an explosion proof feature
본 제품은 방폭제품으로
제품분해를 금지 함
Red
Amber
Green
Blue
White
Red2
Gray
Black
Orange
Violet
4
It must not be dismantled due
to an explosion proof feature
본 제품은 방폭제품으로
제품분해를 금지 함
External Transistor-PNP
Layer1
Layer2
Layer3
Layer4
Layer5
Buzzer
Steady
Common
Layer1
Layer2
Layer3
Layer4
Layer5
Common Flash
Fuse
Power (Current)