Table of Contents
Advertisement
Replacing the Dog Collar VHF Antenna
Before you replace the VHF antenna, you must remove all dirt, water, and debris from the dog collar device. You
must also have a small Phillips (#2) screwdriver.
1 Remove the 2 screws
from the cover over the VHF antenna.
2 Remove the VHF antenna cover.
3 Remove the screw
securing the VHF antenna to the back plate.
4 Pull the length of the antenna from the antenna guide to remove the old antenna.
5 Thread the new VHF antenna through the antenna guide.
6 Replace the screw securing the VHF antenna to the back plate.
7 Replace the cover over the VHF antenna.
8 Replace and tighten the 2 screws securing the VHF antenna cover.
9 Secure the antenna with additional antenna clips (optional).
Appendix
11
Advertisement
Table of Contents
