Battery Recharge; Maintenance - Midland G11 PRO Instruction Manual

Battery recharge

G11 PRO is equipped for using a 7,4V Li-ion rechargeable battery pack which can
be recharged connecting the socket of the AC/DC wall adaptor to a mains power
socket and inserting the jack of the wall adaptor into the desktop charger plug.
It takes 4-5 hours to fully recharge the radio.
For maximum battery life, we recommend charging the battery pack when the G11
PRO is off and the battery pack is fully discharged.
! Using a different battery charger other than the one specified can cause damage to
your device or may even cause explosions and personal injuries.
The Battery power saving feature enables a reduction in consumption of up to 50%.
If it has been set, it comes on automatically when the transceiver does not receive
any signal for more than 7 seconds in order to save the battery life. Power saving can
be set only through Programming software.

Maintenance

Your G11 PRO was designed to fulfill any warranty obligations and to enjoy this
product for many years.
As for all the electronically devices, we recommend you to follow this few sugge-
stions:
› Do not attempt to open the unit. Non-expert handling of the unit may damage
it and/or annul the warranty.
› When using regulated power supply, take notice of power voltage, that must be
between 6V and 8V to avoid damages.
› High temperatures can shorten the life of electronic devices, and warp or melt
certain plastics. Do not store the radio in dusty or dirty areas.
› Keep the Radio dry. Rainwater or damp will corrode electronic circuits.
› If it appears that the Radio diffuses peculiar smell or smoke, please shut off its
power immediately and take off the charger or battery from the Radio.
› Do not transmit without antenna.
Midland G11 PRO instruction guide | 9