Prestel FHD-T412D User Manual
  1. Manuals
  2. Brands
  3. Prestel Manuals
  4. Security Camera
  5. FHD-T412D
  6. User manual

Prestel FHD-T412D User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FHD-T412D
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FHD-T412D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Prestel FHD-T412D

Summary of Contents for Prestel FHD-T412D

  • Page 1 FHD-T412D User manual...
  • Page 2 Preface： Thank you for using the company's integrated high-definition intelligent teaching tracking camera. This manual details the general principles and methods of the functions of the camera, the installation and operation of the camera. Before installing and using the user, please read in detail. important：...

  • Page 3: Electrical Safety

    Precautions  Electrical safety The installation and use of this product must strictly comply with local electrical safety standards.  Carefully transport Transport, storage and installation process to prevent heavy pressure, severe vibration, soak damage to the product.  Power polarity This product uses DC +12 V power supply, the maximum current of 2.5A, power plug polarity as shown below.

  • Page 4: Product Feature

    Product Feature  Integrated design Integrated design, can also output 5 high-definition 1080P (close-up machine 3, panoramic machine 2) video. Students track with  Lens can be replaced Panorama lens can be replaced, compatible with C / CS interface lens, easy to cope with different sizes of classroom needs.
  • Page 5  Ultra frame rate 1080P output frame rate up to 60fps  AAC audio coding Features AAC audio encoding, better sound quality, less bandwidth.  Local storage Close-up machine to support the local storage function, no NVR can be realized U disk local direct recording tracking video.

  • Page 6: Product Spec

    Product Spec FHD-T412D Product Model Integration of high - definition intelligent teaching tracking camera Product Name Auto Tracking Camera HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, Video System 720p/50, 720p/30, 720p/25 Senser 1/2.7 inch, CMOS, Effective Pixels：2.07 Million Scanning...
  • Page 7 Preset Accuray 0.1° Panorama camera 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, Video System 720p/50 Senser 1/2.7 inch, CMOS, Effective Pixels：2.07 Million Scanning Scanning Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8 Automatic iris Low Light 0.05 Lux @ (F1.8, AGC ON) Shutter 1/30s ~ 1/10000s Auto,3000K/Indoor,4000K,5000K/Outdoor,6500K-1,6500K-2,6500K-3,One...
  • Page 8 Audio Bit Rate 96Kbps, 128Kbps, 256Kbps Support Protocols TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP Input/Output Interface 1xHDMI: Version 1.3 HD Output 2x3G-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M standard Network Interface 2xRJ45: 10M/100M Ethernet Interface Audio Interface 1-ch: 3.5mm Audio Interface, Line In 1xUSB2.0: Type A female jack 1xRS232 In: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P (for close-up camera)
  • Page 9 Standard accessories When opening the package, check and confirm all attachments that should be provided integrated HD intelligent Remote control, control Power adapter, camera power teaching tracking camera x1 camera x1 supply x1 AC power extension cord, camera RS232 serial cable, connecting the Wall mount, fixed tracking power supply x1 camera and computer x1...

  • Page 10: Remote Control

    Remote Control 1. Standby button Press the camera to enter standby mode and press the camera again to turn it on again.。 2、Number button Set Preset or Call Preset 3、* button Use with other buttons 4, set the preset position Set Preset: Save a preset bit Set Preset + Numeric Keys (0-9): Set a preset corresponding to the number keys...
  • Page 11 In manual focus mode, you can focus on close backlight ON / OFF button. To cancel this function, objects by pressing [far] to focus on distant objects press the backlight ON / OFF key again. or [proximal]. 17, PTZ reset button 10, the camera selection key Press the head after the start of self-test Select the camera you want to control...
  • Page 12 Introduction to Host Interface 5、The video system selects the rotary switch 1、Close-up machine 6、RS232 OUT interface 2、Panorama machine 7、RS232 OUT interface 8、RS232 IN interface 9、LAN Network interface 10、LINE-IN interface 11、RS485 interface 12、Reset 13、SDI OUT interface 14、SDI interface 15、HDMI interface 3、Install the positioning hole 16、USB2.0 interface 4、Install screw holes 17、NET network interface...
  • Page 13 Interface Interface Function name SYSTEM Camera video output system selection SELECT Use RS232 cable for communication between the camera and the RS232 OUT recording and broadcasting host, the camera can output the director command, but also can receive the control command from the recording and broadcasting host Use an RS232 cable to connect your camcorder to a camcorder or RS232 OUT...
  • Page 14 Network interface, providing a network connection for the camera DC 12V Connect the power adapter to provide a 12V power supply for the camera...
  • Page 15 The setting of video system The sixteen rotary switches are used to set the format of the output video for the video port (video format).VIDEO SYSTEM Switch Video format Switch Video format position position 1080p60 720p30 1080p50 720p25 1080i60 1080i50 720p60 720p50 1080p30...

  • Page 16: Quick Installation

    Quick installation Wall installation Step 1: Four holes on the wall that correspond to the size and position of the wall mounts, and the wall mounts are fixed to the walls Step 2: Place the alignment holes of the camera at the mounting brackets on the wall mounts Step 3: Rotate the camera at the appropriate angle and fasten the camera's fastening screws to secure the camera Note！...
  • Page 17  Live camera installation location Description：  Teacher installed close to the classroom axis, height of 2.2 meters; student machine installed in the classroom before any position, height of 2.2 meters, installed in the  recommended location.  Camera system connection...
  • Page 18 Network mode system connection diagram Serial port system connection diagram Description：  Teacher mode, student machine, board computer, video recorder between the network mode and serial mode support, network mode support protocol: UDP, TCP; serial mode baud rate: 9600  Teacher machine panorama / teacher tracking, student machine panorama / student machine tracking, blackboard tracking, a total of 5 SDI video signal and video recording host connection...
  • Page 19  Teacher machine / student machine / board computer can be sent to track the process of the state code or switch code to the recording and broadcasting host, recording and broadcasting host according to the instructions received video switching action teacher machine / student machine / board computer, guide parameters are tracked through the ...

  • Page 21: Tracking Function

    Tracking Function 1 Tracking Configuration 1.1 Tracking Configuration Tool： Free installation, mouse double click, you can open the tracking configuration tool. 1.2 Tracking Configuration Interface： 2 Tracking parameter configuration Tracking parameter configuration selection 1) Teacher-side tracking interface selection Enter the teacher-side tracking configuration interface 2) Student side tracking interface selection Go to the student side tracking configuration interface...
  • Page 22 3) Board-side tracking interface selection Go to the board-edge tracking configuration interface Targeting interface selection 4) Targeting interface selection Go to the director-side configuration interface 2.2 Language selection Choice of Chinese or English 2.3 Teacher-side tracking parameter configuration 1) Teacher side close-up machine IP address Enter the IP address of the teacher's special machine and click [Connect] to preview the image 2) Teacher side special set (Top, bottom, left, right, top left, top right, bottom left, bottom right, home position rotation).
  • Page 23 Set the panorama bit: Trim pan, that is, preset 0, set the preset 0 with the remote control. Call the panorama: Call the Trim Scene. Set the station bit: close-up station, that is, preset 1, the remote control can be used to set the preset Call the station bit: call the special machine station.
  • Page 24 Panorama lens position calibration ： Check the "Show Verification Cross", the Close-up / Panorama preview image display the check icon, and control it up and down by the PTZ to ensure that the center of the image is coincident with the center of the panorama image, and then click [Check] To achieve the panorama lens calibration;...
  • Page 25 Version Information：Displays the version information of the writer and panorama. 6) Set the shield area Click [Display] to display the current configuration tracking area and mask area in the preview image. Select the [tracking area], the left mouse button click on the preview image, drag any direction, set the tracking area;...
  • Page 26 1) Student side tracking parameter configuration Refer to the teacher side configuration 2) Student side close-up settings Refer to the teacher side configuration 3) Student end panorama IP address Refer to the teacher side configuration 4) Student side basic parameter configuration Camera mounting height：Student camera distance from the ground vertical height, set the range: 1.0 ~ 5.0, the default value of 2.2 meters；...
  • Page 27 Tracking settings：Set the student side of the camera's work mode, select: boot tracking For other parameters please refer to the teacher side configuration 6) Set the shield area Student cameras do not need to set the tracking area, outside the shield area belongs to the tracking area.
  • Page 28 neighborhood or on the boundary, as shown in the following figure: 7) Turn on tracking Click 【Application (*)】, display as 【Application】, the configuration parameters take effect! Click 【Get】 to get the current camera configuration parameters; Click [Default] to restore the default configuration parameters; Click 【Open Tracking】, the camera enters the automatic tracking state, you can turn off the tracking configuration tool;...
  • Page 29 1) Board-side close-up machine IP address Board-side close-up machine IP address 2) Board-side close-up machine settings Refer to the teacher side configuration 3) Panorama Panorama IP address Panorama IP address 4) the basic parameters of the board configuration Tracking sensitivity：Detection of the sensitivity of the blackboard action, set the range: 0 ~ 4, the default value of 0;...
  • Page 30 Board-side enable：Check the "√", open the panel to enable; Other parameters please refer to the teacher side configuration; 6) Set the shield area Refer to the teacher side configuration 7) Turn on tracking Click 【Application (*)】, display as 【Application】, the configuration parameters take effect! Click 【Get】...
  • Page 31 Click [Default] to restore the default configuration parameters; Click 【Open Tracking】, the camera enters the automatic tracking state, you can turn off the tracking configuration tool; Click [stop tracking], the camera enters the stop tracking state, you can configure the tracking parameters; 8) Director-side tracking parameter settings The communication terminal is used to configure the communication parameters between the teacher and the host computer, Command and so on.
  • Page 32 Baud rate：Communication protocol Select the serial port, the serial port baud rate is 9600K bps, can not be modified. Protocol：Camera and recording and broadcasting host communication between the serial port or network, need to select UDP, TCP and a serial port, the default selection: UDP. Instruction format：The communication command format between the camera and the master station supports the choice of hexadecimal or string format, and all status codes are set freely.

  • Page 33: Network Function

    first blackboard when there is action, send a blackboard to switch code, blackboard no action, to determine whether there is action in the student area, and finally judge the teacher action. For example, when the teacher is not in the platform area or is moving, send the teacher panorama switch code, the teacher in the podium area and still, send the teacher special code, if the student stands up, first send students panoramic switch code, students close the machine in place, send students Close-up of the code, the students sit down or stand out (30s-60s) and return to the teacher's picture.
  • Page 34 Method 2: In the Division I camera upgrade software configuration items to modify, and then click Settings: 3. After changing the camera IP need to restart the camera,...

  • Page 35: Operation Tips

    There are two ways: Method 1: Manual power off Method 2: Click on the page system configuration item to restart (for remote) Operation tips Teacher machine factory default IP: 1、Close-up machine 192.168.100.81 2、Panorama machine 192.168.100.82 Student machine factory default IP: 1、Close-up machine 192.168.100.91 2、Panorama machine 192.168.100.92 Network upgrade program download instructions.

  • Page 36: Menu Settings

    Menu settings This description mainly describes the special 2. EXPOSURE machine menu, panoramic machine menu only to Move the cursor to the Exposure item in the explain the difference. main menu and press [home] button, EXPOSURE menu appears, as shown in the following figure. 1.
  • Page 37 Gain Limit: Can be set: 0 ~ 15. (Valid only in Colour auto, aperture and brightness modes) White balance mode is automatic Anti-flicker: can be set items: off, 50Hz, 60Hz. Red fine tune (Valid only for automatic and brightness priority) Aperture: Can be set: F1.8, F2.0, F2.4, F2.8, Blue fine F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, off.
  • Page 38 White Balance Sensitivity: Can be set: High, soft, 5S Medium, Low Distortion correction: can be set items: open, off (close-up machine without this menu) 4. Image Note： Move the cursor to "Image" in the main menu and press the [HOME] key to enter the image page, 1080p60 and 1080p50 do not support as shown in the following figure.
  • Page 39 Left and right settings: can be set items: items: Off, 1 ~ 5（Close-up machine has no that standard, reverse. option） Adjust the image when the setting is frozen: Can be set: On, off. 7. SETUP Display information: Can be set: On, Off. Move the cursor to the Setup item in the main Digital zoom: settable items: off, 2x, 4x, 8x, menu and press [home] button, SETUP menu...
  • Page 40 8. Communication settings (only Zoon) Setting Move the cursor to "Communication Settings" in Language Chinese the main menu and press the [HOME] key to enter Protocol VISCA the setup page, as shown in the following figure. VISCA address Communication settings Baud rate 9600 Protocol...
  • Page 41 9. Information（Only the panorama has） Restore Defaults In the main menu, move the cursor to "Info" and press the [HOME] key to enter the information page, as shown in the following. Restore Default? Modify Information [Home] Confirmation Version 6.2.11 [Menu] return Model H2.V Date...
  • Page 42 RS-232 Interface Camera Windows DB-9 1. DTR 1.CD 2. DSR 2.RXD 3. TXD 3.TXD 4. GND 4.DTR 5. RXD 5.GND 6. GND 6.DSR 7. IR OUT 7.RTS 8. NC 8.CTS 9. RI Camera Mini DIN Function 1. DTR 1.DTR 2. DSR 2.DSR 3.

  • Page 43: Protocol List

    Size Protocol list Note: The serial port of the camera follows the standard VISCA / Pelco-D / Pelco-P protocol. For secondary development, the camera can be controlled according to the standard protocol. To provide a detailed list of VISCA / Pelco-D / Pelco-P protocol, Please contact the manufacturer to obtain.

  • Page 44: Maintenance And Troubleshooting

    Maintenance and Troubleshooting The maintenance of the camera If the camcorder is not used for a long time, disconnect the power switch after use and disconnect the AC adapter from the AC outlet  When removing dust from the camera case, use a soft cloth or tissue When cleaning the camera lens, please use a dry soft cloth to wipe, such as dirt is serious, please use a mild detergent gently wipe.

  • Page 45: Control Failure

    Sound failure  No sound 1、Please check the host's audio connection 2、Please check the IP Camera audio parameter settings, whether the monitoring function is enabled Tracking fault Teacher Side Tracking location is not accurate, always biased in one direction 1, to repeat the panoramic lens position calibration; 2, set the level of calibration, vertical calibration;...
  • Page 46  Remote control cannot control 1、Replace the new remote control battery； 2、Is the camera connected correctly?。  Serial port cannot control and communication 1、Is the camera connected correctly?； 2、Check that the control cable is well connected。  Network fluent, but cannot control 1、Check whether the network is on the same network segment；...

Table of Contents