Copyright All contents of this manual, whose copyright belongs to our corporation, cannot be cloned, copied or translated without the permission of our corporation. Notice Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.
1080P HD PTZ Camera User Manual turn on the power until all installations are completed. Safety Precautions To avoid heat build-up, keep ventilation around the device smooth. During the installation and use of the If the device emits smoke, smells, or makes equipment, all electrical safety regulations of noises, please turn off the power immediately the country and region of use must be strictly...
Page 5
1080P HD PTZ Camera User Manual 3.5mm Audio Cable (Not Supplied) 3.5mm Audio Cable (Not Supplied) RS485 Cable (Not Supplied) RS232 Cable (Supplied) RS232 Cable (Not Supplied) SYSTEM AC Adapter (Supplied) SELECT RS485 LINE IN LINE OUT IN RS232 OUT DC 12V IN Power Cable (Supplied) DC 12V...
1080P HD PTZ Camera User Manual 2) Connect the power adapter to the power other industries. Leading Auto Focus Technology connector on the rear panel of the camera. The power indicator on the front panel of the Using advanced focusing algorithm, the lens can camera is on.
Page 7
1080P HD PTZ Camera User Manual Pan Angle ±170° Audio Bit Rate 96Kbps, 128Kbps, 256Kbps TCP/IP, HTTP, RTSP, Tilt Angle -30° ~ +90° Protocols ONVIF, RTMP/RTMPS, Pan Speed 1.7° ~ 100°/s DHCP, SRT, Multicast, etc. Tilt Speed 1.7° ~ 69.9°/s Interfaces LINE IN 1 x LINE IN: 3.5mm Audio...
1080P HD PTZ Camera User Manual 5.3 Interface and Switch SYSTEM SELECT RS485 LINE IN LINE OUT IN RS232 OUT DC 12V HDMI 3G-SDI USB 3.0 10 11 12 Item Description LINE IN Interface LINE OUT Interface System Select Switch RS485 Interface RS232 IN Interface RS232 OUT Interface...
Page 9
1080P HD PTZ Camera User Manual 5.4 Dimension STANDBY POWER Ø141.5 141.5...
5.5 Installation Wall-Mount Ceiling-Mount The installation diagram is for reference only. The brackets and screws are not standard. Note For packing accessories, please refer to the actual product.
Page 11
1080P HD PTZ Camera User Manual 6. Return Key 5.6 Remote Control Press to return to the previous menu 7. ZOOM Key SLOW: Zoom In [+] or Zoom Out [-] slowly FAST: Zoom In [+] or Zoom Out [-] fast CAMERA SELECT 8.
1080P HD PTZ Camera User Manual Flicker: Off, 50Hz, 60Hz (Effective only in Auto, GUI Settings Iris Priority, Bright Priority mode). Expcomp Mode: On, Off (Effective only in Auto, 6.1 Menu Iris Priority mode). Press [MENU] key to display the main menu on Expmode: -7~7 (Effective only in Expcomp Mode the normal screen, using arrow key to move the to On).
1080P HD PTZ Camera User Manual One Push mode). Display > OSD-Dir R-Tuning: -128~128 (Effective only in Auto, HDMI Mode HDMI Temp, One Push mode). SDI Mode Level A B-Tuning: -128~128 (Effective only in Auto, Flip-H Temp, One Push mode). Flip-V Hue: 0~99.
1080P HD PTZ Camera User Manual Zoom Speed: 0~7. 6.9 Default PTbyZoom: On, Off. Move the main menu cursor to [Default], press 6.7 Setting [HOME] key enter default page, as shown in the Move the main menu cursor to [Setting], following figure.
Page 15
1080P HD PTZ Camera User Manual PTZ Speeds 1) Video playback pause button: control real-time Pan speed can be set at any rate between 1 ~ 24, video pause, stop the last picture, click Tilt speed can be set at any rate between 1 ~ 20. recoverable video again.
1080P HD PTZ Camera User Manual the image. However, the configuration of the bit 7.3 Video Settings rate needs to be combined with the network Video Settings bandwidth. When the network bandwidth is narrow Video Format Dial Priority and the bit rate is configured larger, the video Low Latency Mode (The OSD function will not be enabled after it is turned on) stream cannot be transmitted normally, and the...
1080P HD PTZ Camera User Manual Brightness 7.6 System Settings Brightness of image: 0~99 (Default value is 50). Initialize Saturation Saturation of image: 0~200 (Default value is 100). Reboot Reboot Contrast User Contrast of image: 0~99 (Default value is 50). UserName admin Sharpness...
1080P HD PTZ Camera User Manual D. UDP Port RTMP(S) Settings Support UDP protocol, default port: 1259. First Stream E. Sony Visca rtmp://192.168.100.138/live/stream0 Support Sony Visca, default value: 52381. Second Stream RTMP(S) Settings rtmp://192.168.100.138/live/stream1 Turn On/Off first stream or second stream, setting SRT Settings the MRL of RTMP.
Page 19
1080P HD PTZ Camera User Manual The video image displayed by the camera lens Forget the IP address or login password is jittery Please remember (The default IP address: 1) Check whether the camera installed position 192.168.100.88; default user name: admin; default be stabled.
Need help?
Do you have a question about the HD-PTZ420HSU3 and is the answer not in the manual?
Questions and answers