Connect Peripheral Equipment; Connecting And Selecting Equipment; Video Recorder - Philips 20-LCD TV 20PF9925 User Manual

126 1019.1 (20") am 26-02-2002 17:06 Pagina 12

Connect Peripheral Equipment

There is a wide range of video and audio
equipment that can be connected to your TV.
The following connection diagrams show you
how to connect them.

Video recorder

CABLE
DC 15V Y Pb Pr L AUDIO
COMPONENT (480i/480p)
DVD/ DTV IN
1
VCR
How to connect
&
Connect the supplied antenna cable 1
to the port of your VCR.
RF IN
é
Connect another RF cable 2 from the
of your VCR to the x
output
OUT
input of your TV. Better quality when
playing from your VCR can be obtained if
you also connect the Video, Audio Left
and Right (only for stereo equipment)
cables 3 to the
inputs .
AV
Connect Peripheral Equipment
12
R S-VIDEO VIDEO L AUDIO R VIDEO L AUDIO
IN
AV MONITOR OUT
2
3
, and
VIDEO AUDIO L
Preparation
Remove the backplate at the back of the TV as
shown on the illustration opposite.
Lay the LCD TV with the screen down on a
table as it will be easier to connect your
peripheral equipment. Please take your
precautions not to damage the screen.
If you are using only mono equipment,
connect only the
ports.
(Mono)
If your VCR has an S-VHS video jack:
For improved picture quality, connect a
S-Video cable with the
the TV instead of connecting the VCR to
the port of
VIDEO
R ANT IN
x 75
S-Video does not provide audio, so audio
cables must still be connected to provide
sound.
Watching VCR
&
If you use connection 2, select the TV
channel 3 or 4.
é
If you use connection 3, select
in the Input menu item of the
S-VIDEO
setup menu, see p. 6.
"
Insert a video tape in the VCR and press
the button.
PLAY
R
and the
VIDEO AUDIO L
input on
S-VIDEO
.
AV
or
VIDEO