Operation Of The Appliance - Beko HCA62640WH User Manual

3

Operation of the appliance

3.1 Controlling the appliance
B
A
KEY FUNCTION
A : Light On
You may illuminate the cooking area
/ Off
by pressing this button. Re-press the
button to turn off the lamp.
B : 1. Stage
Operates the appliance on 1st speed.
Button When you press this button again
to turn off the appliance, the screen
speed stage turns off.
C : 2. Stage
Operates the appliance on 2nd
Button
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
D : 3. Stage Operates the appliance on 3rd speed.
Button
When you press this button again
to turn off the appliance, the screen
speed stage turns off.
3.2 Efficient use in terms of energy
saving
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
3.3 Operation of the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
10 / EN
D
C
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (B,C,D)
• You can illuminate the cooking area by pressing
the lamp. (A)
3.4 Auto-stop in 15 min.
This appliance is equipped with an Auto-Stop
function which allows the appliance to ventilate
the room for an additional period of time in order
to remove the unpleasant odour and vapour in the
room after the cooking is over. Appliance stops au-
tomatically after a certain period of time. To enable
the Auto-stop function, press any of the speed lev-
el keys (B, C, D) on the control for longer than 2
seconds. A timer with 15 minutes will be activated.
If you press the same speed level key while the
Auto-stop function is enabled, function will be dis-
abled and the appliance will stop. If you select a
different speed level this function will be disabled.
If you want your appliance to stop automatically,
you must enable the Auto-stop function again.
Periodical cleaning of metal filters
Filters must be cleaned at about every 60 hours of
operation or 4 weeks depending on the frequency
of usage.
3.5 Replacing the lamps
MAX 3 W
Cooker Hood / User Manual