Getting Started - NovaStar MeetUs User Manual

2

Getting Started

Do the following steps to quickly build a MeetUs system environment.
Step 1 Assemble the Meeting Board
The following diagram illustrates how the meeting board is assembled, using the MEE200 as an example. This
assembling method is applicable to the MEE200, MEE200H, MEE400, and MEE400H.
Figure 2-1 Assembling the meeting board
Note:
The locations to install the antennas on the MEE200H or MEE400H are slightly different from the locations on
the MEE200. For details, see the respective specifications.
(Optional) Step 2 Connect an OPS Computer
Step 1 Connect the control port of the OPS computer to the OPS control port at the top side of the meeting board.
Step 2 Connect the HDMI output connector of the OPS computer to the HDMI connector at the right side of the
meeting board.
Figure 2-2 Connecting an OPS computer
Step 3 Configure the LED Screen
Step 1 Connect the meeting board to the NovaLCT software on the control computer via any of the following methods.

Via USB port
Connect the control computer to the Mini USB port of the meeting board.

Via Ethernet port
Connect the control computer to the Ethernet port of the meeting board.
www.novastar.tech
MeetUs Meeting Room Display System User Manual
2