Table of Contents
Advertisement
Mirroring Failed After Dongle Inserted to PC
Make sure the mirroring dongle and the Android card have been paired, and the hotspot of the meeting board
has been enabled.
Disable the anti-virus software. Then, unplug and plug the mirroring dongle again.
Manually run the mirroring software client on the PC.
−
For Windows, go to my computer > Client, and run the Client.exe program.
−
For macOS, go to my computer > Client > Client.app > Content > MacOS, and run the Client program
Dongle Activation Failed or Activation Code Required
If the mirroring dongle has no response after you press the round button, activation of the dongle may fail. Do
the procedure below to activate the dongle.
Step 1
Before activation, make sure the network connection is normal.
Step 2
On the home screen of MeetUs system, select Quick Sharing to enter the screen shown below.
Figure 8-1 Quick sharing
Step 3
Press the OK button on the remote or select the icon at the top right corner to open the Mirror Setting menu,
and select Activation Information in the menu.
Step 4
Select Commercial activate. In the displayed dialog box, enter the activation code to activate the mirroring
dongle.
To obtain the activation code, please contact the technical support staff. See the contact information on the
back cover of this document.
Note
To do wireless screen mirroring, make sure the device to be mirrored and the MeetUs system must be on the
same network segment, and the device must connect to the hotspot of the MeetUs system.
Commercial activation for the mirroring dongle is already done at the factory before it is sold to the customers.
Wireless Mirroring Getting Stuck and Having High Latency
Check whether the connection between the device that you are mirroring from and the network of the meeting
board is normal.
Check whether the antennas are connected correctly to the meeting board.
www.novastar.tech
MeetUs Meeting Room Display System User Manual
34
Advertisement
Table of Contents
