DeLonghi NESPRESSO VERTUO Manual page 9

3. Plug the power cord.
4. Make sure that no accessory (milk carafe or descaling pipe) is connected
to the milk carafe connector door.
5. Turn the machine on.
6. Press hot foam button
7. Clean and descale alerts blink together.
8. Press cappuccino button
combinations. If the selection is not done within 15 sec., it exits automat-
ically.
9. Set the hardness level by pressing the corresponding button in below ta-
ble (within 15 seconds).
Water hardness
1.
10. The buttons blink three times rapidly to confirm new setting.
11. The machine is now reprogrammed with the new water hardness setting
and turns automatically in ready mode.
NOTE: Programming the machine according to the actual hardness of the
local water supply warrants its lifetime and it needs to be descaled less often.
1x
for three seconds to enter the menu mode.
, the system proposes one out of the five
Button to press
+
+
fH dH
< 5
< 3 < 50 mg/l
7.
8. 9.
> 7
> 4 > 70 mg/l
11.
12. 13.
> 13
> 7 > 130 mg/l
15.
16. 17.
> 25
> 14 > 250 mg/l
19.
20. 21.
> 38
> 21 > 380 mg/l
23.
24. 25.
CaCO3
9