Table of Contents
Advertisement
Iridium GO! exec Premium Dual Mode Antenna Kit (with GNSS)
Step 5)
Once the satellite cable is in place
1.
Feed the TS9 end of the GNSS antenna
cable through the bracket tube from the top
(A), and all the way to SMA end.
2.
Make the single flexi-loop on the GNSS
cable as shown in (B) to avoid kinking the
GNSS cable when it is connected to the
antenna.
Step 6)
1.
Connect the SAT antenna
cable connector (TNC-M) to
the antenna connector1
(TNC-F) and hand-tight.
2.
Connect the GNSS antenna
cable connector (SMA-M) to
the antenna connector2
(SMA-F) and hand-tight.
Note:
1)
Use of an external antenna will provide connectivity for the Iridium network and GPS reception.
2)
To ensure maximum performance of the antenna and to maximize availability and reliability of service, the
position of the antenna must:
a)
Have a clear view of the sky
b)
Be clear and free of obstructions
c)
Be clear of metal objects
d)
Be located above and away from other transmitting
devices
e)
Be securely affixed in location
f)
Not be located indoors
g)
Be installed in conjunction with a certified included
cable.
Step 7)
Screw the antenna base
to the antenna housing
using screws and Allen
key provided.
Ensure that you attach
the black rubber seal
(see step 4C above)
provided to the antenna
base plate.
7
Advertisement
Table of Contents
