Removable Iridium Go! Exec Mounting Bracket Installation - Iridium GO! exec GEINSTKT2201 Installation Manual

Step 3:
(A) Orient the Tabdock Mounting-Bracket so that the
Iridium GO! exec image is in upright position.
(B) Align the Tabdock Mounting-Bracket with the 4
hooks on the top of the Double Socket Arm and
slide toward direction with "lock" label until it is
locked.

4 Removable Iridium GO! exec Mounting Bracket Installation

To keep the Iridium GO! exec device securely in place, install the Mounting Bracket kit provided.
A- Double Socket Arm on Suction Cup Twist
Lock Base
Step 4)
(A) Mount the Device on the Tabdock spring-loaded
Mounting-Bracket and make sure the 2 corners of
the device are fully locked and secure.
(B) Adjust position accordingly then tighten knob on
double socket arm.
(C) Connect the Satellite cable and GNSS cable to the
antenna connectors, power supply to the USB power
connector.
B- Tabdock spring-loaded Mounting Bracket
10