5 Specifications
5.1
Iridium Dual Mode Passive Omnidirectional Antenna
Certified dual mode passive Iridium Antenna for use with the Iridium GO! exec
Requires no pointing towards satellite
•
Low loss radome
•
Electrical Specifications:
Frequency
Impedance
VSWR
Satellite System
Polarisation
Axial Ratio
Gain
LNA Gain
Noise Figure
Supply Voltage
Average Current Consumption
Mechanical Specifications:
Color
Height
Diameter
Mounting
Mounting place
Materials
Operating temperature
Connector 1
Connector 2
IP rating
SAT Cable
GNSS Cable
1616 - 1626.5 MHz (SAT)
1561.1 MHz, 1575.42 MHz, 1598.1 - 1605.4 MHz (BeiDou, GPS/Galileo &
GLONASS)
50 ohms (SAT & GNSS)
< 2.0 (SAT)
Iridium (SAT)
BeiDou, GPS, Galileo & GLONASS (GNSS)
RHCP (SAT)
< 3.5 dB (SAT)
2 dBic (SAT)
25 dB (GNSS)
1.2 dB (GNSS)
3.0 - 5.5 V DC (GNSS)
20 mA (GNSS)
White (non-glossy)
150 mm (191.5 mm mounting base included)
Ø 95 mm
Supplied Mounting or any US-style Mounting Bracket with 1"-14NF thread.
On marine vessel or remote homes
ASA, copper, PCB, stainless steel and brass
-40C to +70C
SAT: TNC-female
GNSS: SMA-female
IP68
See 5m/16.404ft passive SAT antenna cable specifications
See 5.25m/17.224ft GNSS antenna cable specifications
12