Iridium GO! exec GEINSTKT2201 Installation Manual page 11

Iridium GO! exec Premium Dual Mode Antenna Kit (with GNSS)
Step 1)
Align the Tabdock Mounting bracket (B) with the 4
hooks on the top of the Double Socket Arm (A) and
slide toward direction with "lock" label until it is locked.
Step 3)
Mount the Device on the spring-loaded Mounting-
Bracket. Please make sure the 2 corners of the device
are fully locked and secure.
Step 2)
Loosen knob on double socket arm (A) and mount the
suction cup of the unit in step 1 on a flat surface (vertical
or horizontal) such as on glass surface ( boat
windscreen), wall or on table as required.
To mount the suction cup, ensure that the lever is in the
up position, push the suction cup firmly against the flat
surface then push the lever down until it locks.
Step 4)
Connect the satellite cable and GNSS cable to the
antenna connectors, power supply to the USB power
connector. Adjust position accordingly then tighten knob
on double socket arm (A). Please make sure the double
sockets arm is resting against a surface.
11